Ziton ZP2-AF2-P, Installation Manual

Page: 155 / 176

ZP2-A Series Installation Manual 149
Appendix A
Default configurations
The following table shows the settings for the default configuration of your panel.
Table 73: Default configurations
Description
Default setting
Power supply operation 230 VAC
Control panel ID 01
Day/night mode Full day to day mode
Control panel network operation Stand-alone
Network global commands Yes
Network mask 0 (all panels excluded from the mask)
Repeater panel network operation Repeater
Repeater mask
All panels repeated
IP address 192.168.104.140
Subnet mask 255.255.255.0
Gateway 0.0.0.0
Port 2505
24V auxiliary Not deactivated during reset, not deactivated when running
on batteries
Fault mask All faults are reported
Sounders re-sound Sounders re-sound
Expansion boards for repeater
panels
Network board is configured
Initial zone 1