ZP2-A Series Installation Manual
163
Appendix D
Regulatory information
European standards for fire control and indicating equipment
These control panels have been designed in accordance with European EN 54-2,
and EN 54-4 standards.
In addition, they comply with the following EN 54-2 optional requirements.
Table 75: EN 54-2 optional requirements
Option
Description
7.8
Output to fire alarm devices [1]
7.9.1
Output to fire alarm routing equipment [2]
7.9.2
Alarm confirmation input from fire alarm routing equipment [2]
7.10
Output to fire protection equipment (type A, B, and C) [3]
7.11
Delays to outputs [4]
7.12
Dependencies on more than one alarm signal (types A, B, and C) [4]
7.13
Alarm counter
8.4
Total loss of the power supply
8.9
Output to fault warning routing equipment
9.5
Disablement of addressable points [4]
10
Test condition [4]
[1] Excluding repeaters and control panels operating in EN 54-2 Evacuation mode or NBN mode.
[2] Excluding repeaters, control panels without fire routing, and control panels with fire routing
operating in NBN mode.
[3] Excluding repeaters and control panels without fire protection controls.
[4] Excluding repeaters.
Summary of Contents for ZP2-AF2-P
