Zero88 ILLUSION 500, Operating Manual

Page: 27 / 122

Memory Defaults
•
TRIGGER
The default memory trigger (GO
button, Automatic or At Time).
•
DELAY UP
The delay before the dimmer channels
and fixture brightness parameters in
the next memory begin to fade in.
•
DELAY DOWN
The delay before the dimmer channels
and fixture brightness parameters in
the current memory begin to fade out.
•
FADE UP
The time for the dimmer channels and
fixture brightness parameters in the
next memory to fade up.
•
FADE DOWN
The time for the dimmer channels and
fixture brightness parameters in the
current memory to fade down.
•
COLOUR DELAY
The delay before the fixture colour
parameters in the next memory begin
to fade.
•
COLOUR TRANSITION
The time for the fixture colour
parameters in the next memory to fade
to their programmed values.
•
BEAMSHAPE DELAY
The delay before the fixture
beamshape parameters in the next
memory begin to fade.
•
BEAMSHAPE TRANSITION
The time for the fixture beamshape
parameters in the next memory to fade
to their programmed values.
•
POSITION DELAY
The delay before the fixture position
parameters in the next memory begin
to fade.
•
POSITION TRANSITION
The time for the fixture position
parameters in the next memory to fade
to their programmed values.
•
DWELL
The hold time from the end of the
transition to the end of the memory.
•
CHASE SPEED
The default chase speed (bpm)
•
RESPONSE
The default response for sound to light
and ripplesound memories (1-16).
NOTES
Recovery Mode
The Recovery Mode determines how the desk
performs when switched off and back on,
either deliberately or accidently.
Recovery Disabled
The desk will come up showing the Memories
Screen, the highlight bar on memory zero.
There are no outputs (unless any submasters
containing data are raised).
Page 1 of the submasters is displayed with no
page overlays in operation.
Recovery Enabled
The desk will come up showing the screen
which was on display when the desk was
switched off.
The previous position in the Memory Stack is
reinstated, ie the current and next memory
are as before.
Any chase memories running are restarted
from step 1.
The submasters come up on the page that
they were on, complete with any overlays
that were in operation at the time.
Illusion 500 Manual 73-741-00 Issue 2 3 - 7
Setup
Figure 3 - 7: Desk Defaults - Memory