Zero88 ILLUSION 500, Operating Manual

Page: 104 / 122

Editing Cues
The data of any programmed cue can
be edited from the Cueline screen.
Key to Editing Handles
When a cue is selected in Stay mode,
various boxes are displayed in the
memory data tracks.
Each of the red boxes relates directly
to one of the delay, fade, transition or
dwell times for the cue as follows:
Brightness Tracks
Top left: Delay Down
Bottom left: Delay Up
Top right: Fade Up
Bottom right: Fade Down
Centre right: Dwell
The orange box adjusts the fade up
and fade down times simultaneously.
Colour Tracks
Left: Colour Delay
Right: Colour Transition
Beamshape Tracks
Left: Beamshape Delay
Right: Beamshape Transition
Position Tracks
Left: Position Delay
Right: Position Transition
Editing Type, Information,
Trigger and Modifiers
1. Move the mouse pointer onto the
required cue in the
Cue Track
and right click. A menu of
available options is displayed.
2. Select the Edit option. The Edit
Cue Window is displayed showing
the current values of the cue
parameters.
3. Modify the fields as required, then
select the
OK button in the
window to confirm the edits and
close the
Edit Cue Window .
Editing Transition Times
The transition times of a cue, or part of
a multi-part cue, can be adjusted from
the Cueline screen as follows:
1. Select the cue to be edited.
Various editing handles, shown as
squares, are displayed in the
memory data tracks (see earlier).
2. To adjust a delay, fade or
transition - left click on the
appropriate square, hold the
mouse button down, and drag the
handle forwards or backwards as
required. The time is shown next
to the handle.
3. Release the mouse button when
the time is at the required value.
Editing Crossfade Time
The fade up and down times for a cue
can be adjusted individually as
described earlier, or together as
follows:
1. Select the cue to be edited.
2. Select the orange handle, which
is situated between the red fade
up and fade down handles, hold
the mouse button down, and drag
the handle backwards or forwards
as required.
3. Release the mouse button.
Editing Dwell Time
The dwell time of a cue, or part of a
multi-part cue, can be edited from the
Cueline screen as follows:
1. Select the cue to be edited. Five
red handles, shown as squares
are displayed in the Brightness
tracks.
2. The centre red square on the right
hand edge is used to edit the
dwell time. Left click on this red
square, hold the mouse button
down, and drag the handle
forwards or backwards as
required. The dwell time is shown
next to the handle.
3. Release the mouse button when
the dwell time is at the required
value.
9 - 4 Illusion 500 Manual 73-741-00 Issue 2
Cueline
Figure 9 - 4: Edit Cue Window