Zero88 ILLUSION 500, Operating Manual

Page: 71 / 122

Save Excluding Submasters
This option is the same as Save
except a popup window is displayed
allowing the dimmer channel and
fixture brightness outputs from
individual submasters and/or Playback
A/B to be excluded.
Save As Excluding
Submasters
This option is the same as Save As
except a popup window is displayed
allowing the dimmer channel and
fixture brightness outputs from
individual submasters and Playback
A/B to be excluded.
Save Step Excluding
Submasters
This option is only available when
editing a chase, sound to light or
ripplesound memory.
The option is the same as the Save
Step function except a popup window
is displayed allowing the dimmer
channel and fixture brightness outputs
from individual submasters and
Playback A/B to be excluded.
Cancel (F8)
This option closes the Save Options
menu.
Save (As) Excluding
Submasters Window
This popup window is displayed when
the
Save Excluding Submasters,
Save As Excluding Submasters or
Save Step Excluding Submasters
options are selected from the Save
Options menu (see earlier sections).
It allows the dimmer channel and
fixture brightness outputs resulting
from each of the submasters and
Playback A/B to be selectively included
or excluded in the channel data prior to
it being saved.
Use the cursor keys or mouse to select
the required submaster or Playback
A/B and select
Include or Exclude as
required.
Select the Include All button to set all
the submasters and Playback fields to
Include .
Select the Exclude All button to set all
the submasters and Playback fields to
Exclude .
Select the OK button to confirm the
settings in the window and save the
channel data.
Select the Cancel button to cancel the
operation and close the window.
Undoing an Accidental Save
If channel data is accidently saved to a
memory (or submaster) it is possible to
reverse the save operation using the
UNDO EDIT button.
Press the UNDO EDIT button. The
Undo Save window is displayed.
Select the Undo Save Only button to
restore the channel data in the memory
or submaster to its previous values.
Select the Undo Save & Restore
Channel Data button to restore the
channel data in the memory or
submaster to its previous values and
open the PW as follows:
If previously editing live - the PW is
opened (as if the CHANNEL button
was pressed) and the channel data
which was saved is added into the
channel data in the PW and output live.
If previously editing blind - the PW is
opened in a special blind mode and the
channel data which was saved is
added into the channel data in the PW.
The channel data is not output live.
Select the Cancel button to cancel the
undo save operation.
Illusion 500 Manual 73-741-00 Issue 2 5 - 13
Memories
Figure 5 - 12: Save (As) Excluding Submasters Window