Zero88 ILLUSION 500, Operating Manual

Page: 72 / 122

Modifying Memory Data
If any memory data on the Memories
screen for a unprogrammed memory is
edited (eg trigger, name, fade times),
and an attempt is made to save the
memory, a warning message is
displayed saying that no channel data
has been programmed for the memory.
If any memory data on the Memories
screen for a programmed memory is
edited (eg trigger, name, fade times), a
modify flag (M) is displayed next to the
memory number.
To commit the edits to the memory,
press the SAVE button on the front
panel, or right click and select the
Save
option from the menu. The edits are
saved and the modify flag is removed.
If memory data has been modified and
not saved, and an attempt is made to
change the memory number or to
display a different screen on the
monitor, a popup warning message is
displayed.
Select the Save Changes or Lose
Changes button in the popup window,
as required.
The popup window is closed and the
modify flag is removed.
Editing Memories Live
When a programmed memory is
selected and the EDIT LIVE button
pressed, the selected memory is faded
in and output live on the DMX.
The current memory on the Memory
Stack is temporarily removed from the
outputs (except when Tracking is
enabled, where it remains on the
outputs).
Any changes made to the channel data
are visible in the CDW and appear live
on the outputs.
Editing Memories Blind
When a programmed memory is
selected and the EDIT BLIND button is
pressed, the selected memory
becomes the next memory.
The current memory on the Memory
Stack and the DMX outputs remain
unaffected.
Any changes made to the channel data
are only visible in the CDW and do not
affect the DMX outputs.
Switching Edit Modes
When editing a memory live or blind,
pressing the ‘other’ Edit button on the
front panel will switch the edit mode.
The lights in the EDIT buttons, the data
in the PW and the DMX outputs will
change accordingly.
Editing and Tracking Options
This function is only applicable when
editing programmed memories in
Partial Mode. The desk software
monitors which dimmer channels and
fixture parameters have been changed
during the editing process.
When the channel data is saved back
into the same memory, the following
tracking options are provided:
Track Forwards: The changes made
in the edited memory are tracked
forwards through subsequent
memories until a programmed value is
encountered.
Track Backwards: The changes made
in the edited memory are tracked
backwards through previous memories
to the point where the dimmer channel
or fixture parameter was last
programmed. Memories after the
edited memory are not affected.
Track Forwards and Backwards: The
changes made in the edited memory
are tracked backwards through
previous memories to the point where
the dimmer channel or fixture
parameter was last programmed, and
tracked forwards through subsequent
memories until a new programmed
value is encountered.
Cue Only: The changes made in the
edited memory are only applied in that
memory. The outputs of previous and
subsequent memories are not affected.
5 - 14 Illusion 500 Manual 73-741-00 Issue 2
Memories
Figure 5 - 13: Save - Tracking Options Window