Zeiss Humphrey II-i series, User Manual

Page: 494 / 580

Networking Reference
Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
I-4
Setting Up Your HFA Network
Note: It is strongly recommended that you use the EasyConnect RCT in Easy Mode instead of
manually configuring your network settings on your HFA II-
i
instruments (see “EasyConnect RCT
1.0,” on page G-1 ).
You may set up your HFA network to work with Link-Local, DHCP, or STATIC IP.
The following describes the procedures.
1
Go to the Main Menu, select SYSTEM SETUP ( Figure I.2 ).
Figure I.2 Main Menu Screen 2
On the System Setup screen, select COMMUNICATIONS SETUP ( Figure I.3 ) to open the
Communications Setup menu.
Figure I.3 System Setup Screen