Zeiss Humphrey II-i series, User Manual

Page: 441 / 580

Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
EasyConnect RCT 1.0 G-1
(G) EasyConnect RCT 1.0
Overview G-1
Before You Run the RCT G-2
Enable the RCT and Name HFA II-i Instruments G-3
Launch the RCT G-4
Easy Mode (default) G-6
Copy Mode G-14
Custom Mode G-20
Report Mode G-31
Test Mode G-35
Troubleshooting G-43
Note: It is strongly recommended that you use the EasyConnect RCT in Easy Mode instead of
manually configuring your network settings on your HFA II-
i
instruments.
Overview
EasyConnect
RCT 1.0 (RCT) is a remote configuration program that configures network settings for
HFA-NET Pro on Humphrey HFA II-
i
instruments running system software version 4.2 or later. The
RCT uses a multi-page wizard to guide the operator step-by-step through the HFA-NET Pro
configuration process. It provides a simple mode of operation that will make most of the decisions,
selecting default values for configuration data.
The RCT runs from a
computer
connected to an
existing network
—not from an HFA II-
i
instrument.
The RCT runs on NT 5.x based Windows systems:
• Windows 2000
• Windows Server® 2003
• Windows XP
Configurable features are HFA-NET Pro Windows file sharing Shared folder and Shared Printer
setups. FTP (File Transfer Protocol) connections must still be configured manually.