Zeiss Humphrey II-i series, User Manual

Page: 365 / 580

Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
Networking 14-27
Manually Creating Patient Folders with the Specify Patient Folders Function
1
Select
FILE FUNCTIONS
. Then, select SPECIFY PATIENT FOLDERS ( Figure 14.29 ) to open the
screen that is shown in Figure 14.30 .
Figure 14.29 The Specify Patient Folders Button 2
Touch the drop-down arrow next to the Source drop-down box. Select your source of patient
data as either HARD DRIVE (
Figure 14.30 ), FLOPPY, or a USB storage device.

Figure 14.30 Specify Patient Folder - Disk Options Screen 3
If you desire to limit the range of files, select SET CURRENT RANGE. Specify any limitations that
you wish to place on your search of all available files. You can limit the selection by Patient
Name or test dates. These limitations will determine which patients will be available for you to
include in the patient folders that you are creating. PROCEED returns you to Disk Options.
4
Select PROCEED. A pop-up keyboard will be displayed to allow you to enter a name to find. If
you limited your search in Step 3, you can leave the keyboard entry line blank.