Zeiss Humphrey II-i series, User Manual

Page: 537 / 580

Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
Installing & Licensing HFA II-i Software J-7
After pressing the “i”, the screen title would say “HFA II-
i
Series Configuration” and then
your Model and Serial number will be displayed (for example, “Model 750” and “Serial
Number 750-1234”).
5
Go to the bottom of the page, where it says: “When ready use the form to create your License
Key” and click on the word “ form ” (See Figure J.8 below).
Click “form”
Figure J.8 Carl Zeiss Software License Registration Page on the Internet 6
Enter your Certificate Serial Number (including the alphabetic prefix and the intervening dash
before the number) and click the Submit button.
7
Enter your Instrument Serial Number and click the Submit button.
Note: When you enter your instrument serial number on the web, be sure to include the “i”. For
example, the number 750-1234 must be entered as 750i-1234. You will not be able to license
software with an incorrectly entered serial number.
8
Enter your Node ID and personal information and click the Submit button to generate your
License Key and Security Code.
9
Write down your License Key and Security Code, or print out and save the entire web page for
reference. Go on to the next section to begin entering your licensing information on your

HFA II-
i
.