Zeiss Humphrey II-i series, User Manual

Page: 492 / 580

Networking Reference
Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
I-2
If Connecting to a Network or Peer-to-Peer
If you wish to use these types of configurations, refer to the following sections of this chapter:
• “Connecting Your Network Components,” on page I-3
• “Setting Up Your HFA Network,” on page I-4
• “Archiving Data,” on page I-14
• “Setting Up Printing To a File,” on page I-25
• “Backing Up and Restoring Your HFA Network Configuration,” on page I-27
Network Procedure Summary
Note: It is strongly recommended that you use the
EasyConnect
RCT in Easy Mode instead of
manually configuring your network settings on your HFA II-
i
instruments (see “EasyConnect RCT
1.0,” on page G-1 ).
Please contact Carl Zeiss Meditec for minimum network requirements prior to having your software
licensed for HFA-NET Pro. In order to be able to network your HFA II-
i
, you will need to have HFA II-
i
system software 4.0 or later in your instruments, and have licensed HFA-NET Pro.
Then you will need to complete the following:
1. Connect an ethernet cable to HFA II-
i
’s network port.
2. Complete all applicable Communications Setup screens:
A. HFA Network (Link-Local, DHCP, or Manual)
B. Data Export (FTP or Shared Folder, Patient Folders)
C. Archive/Retrieve (to Synchronize Databases and/or Backup to File Server)
3. Set up the instrument to “Save and Transmit” exams.
4. For sites using EMR/PMS/DICOM, complete the additional applicable Communications Setup
screens:
A. EMR/PMS Export Setup
B. Work List Setup
C. DICOM Gateway Setup