Zeiss Humphrey II-i series, User Manual

Page: 466 / 580

EasyConnect RCT 1.0
Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
G-26
6
If you previously selected a shared folder type of HFA setup, enter the path of the shared folder
or select the
BROWSE
button to locate and specify the shared folder. Select Create separate
subfolders for Work List and EMR/PMS Export if you want to have separate subfolders inside
the shared folder for those features (
Figure G.30 ). This may be required by some EMR products.
Figure G.30 Enter or Browse for the Folder to Share
A default share name for the folder will be created with the name “C:\CZM\HFA2i” if that name
is not already used. If you enter a folder that does not currently exist, you will be asked if you
want to create it. If you enter or select a folder that is not currently shared, then the RCT will
make it sharable.
Note: The RCT only allows you to create a shared folder on a local drive.
The RCT will obtain the computer's name and IP address to set up the selected instruments.
If they do not already exist, the RCT will also create subfolders for each configurable feature
(Separate Worklist and EMR/PMS Export subfolders will only be created if you have that option
selected). The instruments will be configured to use these subfolders for the corresponding fea-
ture setup.
Table G-2 Subfolders for Configured Features
Feature Setup Subfolder Name
Archive/Retrieve Setup Archive
Data Export Setup Data_Export
EMR/PMS Export Setup EMR_Export (optional)
Worklist Setup Work_List (optional)
Select
NEXT
to continue.