Zeiss Humphrey II-i series, User Manual

Page: 290 / 580

Kinetic Testing
Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
13-14
High Res 15 (15 degree steps & 5 degrees on either side of midlines)
Speed: 2 degrees per second;

Size: Goldmann III4e

Total Number of Points per Isopter: 28

Meridians Tested: 5 °, 15 °, 30 °, 45 °, 60 °, 75 °, 85 °, 95 °, 105 °,

120 °, 135 °, 150 °, 165 °, 175 °, 185 °, 195 °,

210 °, 225 °, 240 °, 255 °, 265 °, 275 °, 285 °,

300 °, 315 °, 330 °, 345 °, 355 °
In addition to the 3 patterns listed above, there are two other special
Kinetic tests available. One is the Social Security Administration Dis-
ability Test (SSA Test). The other is a special test used in Germany
(BG/FS Test). The BG/FS test is identical to the Standard 30 test listed
above.
Press the desired test button found in the Kinetic Tests library.
You will have the option to run the test in either the Automatic or the
Step by Step mode as is described in the next section of this chapter.
Running Automated Kinetic Tests
Automatic Mode
The Automatic mode for running a Kinetic test allows you to start the test and have all isopters
tested to the completion of the test. The HFA II-
i
will automatically select the next meridian to test,
start the stimulus, and record at which point the patient pressed the response button. It will
continue until all programmed isopters and meridians have been tested.
Note: No Special Mapping options are available when performing a test in the Automatic mode.