Zeiss Humphrey II-i series, User Manual

Page: 361 / 580

Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
Networking 14-23
5
Press PROCEED. The dialog shown in Figure 14.24 will appear to let you know how the retrieval
is progressing.
Figure 14.24 Data Retrieval Progress Indicator
If you select the CANCEL button during the data retrieval process, the retrieval process will
stop. A dialog will appear that allows you to either CANCEL the operation, CONTINUE the
operation, or UNDO the operation.
Note: The automatic screen saver may blank out the HFA II-
i
screen display during the retrieval
process. Be sure that if you touch the screen to reactivate the display, you only touch the screen at
the very top. Otherwise, you take the risk of inadvertently pressing the CANCEL button that is on the
progress indicator dialog that is positioned near mid-screen. Should you accidentally press that
button, you would have to start the retrieval process over again from the beginning.
6
Once you have completed manually retrieving the pool of archived data to this individual HFA
II-
i
, you will need to repeat this retrieval process for each of the other HFA II-
i
perimeters that
you may have in your office network.
Hint: If you wish to synchronize multiple HFA II-
i
perimeters in your office or clinic routinely, it is far
easier and faster to have your Network Administrator set up automatic synchronization
(archiving/retrieval) than to do it manually.
Retrieve Reminders
If your Remind setting for retrieval (see
“Setting Up Manual Archive Retrieval,” on page I-17 ) is set to
Weekly or Monthly, the first time you are reminded to perform a database retrieval you will receive a
reminder message similar to that shown in
Figure 14.25 upon starting up the HFA II-
i
.
Figure 14.25 Initial Reminder to Retrieve the Database Manually
After the first time you retrieve manually, you will receive a reminder like that shown in Figure 14.26
upon starting up the HFA II- i , if your Remind setting is active. If you select WEEKLY as the retrieval
reminder frequency, upon starting up the HFA II-
i
, you will be reminded to retrieve your data
manually 7 days after your last retrieval, and you will continue to be reminded every day thereafter