background image

Overview

2660021169012 Rev. A  2017-12

CIRRUS HD-OCT User Manual

 9-4 

CIRRUS OCT Angiography Presets

The  CIRRUS

 HD-OCT Angiography and Montage Angio analysis screen includes 12

pre-defined angiography presets, which are the same. The 

CIRRUS

 HD-OCT ONH

Angiography includes 4 predefined angiography presets. These slabs are discussed below.
Larger images of each, and a further discussion  of  the  algorithms  used  to  define  their
boundaries, can be found in Table 9-4.

• Retina Depth Encoded: This is a color encoded slab with different colors representing

different layers (Red: Superficial; Green: Deep; Blue: Avasculature). 
NOTE: This preset is not available for ONH Angiography.

• Retina: This is intended to illustrate vasculature of the entire retina. The inner

boundary is the ILM. The outer boundary is offset above the RPE by 70 

μ

m to minimize

the contribution of the hyper-reflective RPE. 

• VRI: This preset is designed to highlight neovascularization above the vitreoretinal

interface (VRI), such as in proliferative diabetic retinopathy. The outer boundary is the
ILM, and the inner boundary is offset above the ILM by 300 

μ

m.

• Superficial: Superficial retinal layer slab. The inner surface is the ILM layer segmented

in the same manner as CIRRUS HD-OCT structural images, such as Macular Cube
512x128. The outer surface is an approximation of the inner plexiform layer (IPL),
which is estimated by the following equation:

Z

IPL

=Z

ILM

+70%*(T

ILM-OPL

)

Where Z

IPL 

is the boundary location of the estimated IPL, Z

ILM

 is the boundary

location of the ILM, and T

ILM-OPL

 is the thickness between ILM and the outer plexiform

layer (OPL), which is estimated as discussed below.
NOTE: This preset is not available for ONH Angiography.

• Deep: Deep retina layer slab. The inner surface is IPL as described above. The outer

surface is OPL, which is approximated as:

Z

OPL

=Z

RPEfit 

– 110 

μ

m

Where Z

OPL

 is the boundary location of the estimated OPL, and Z

RPEfit

 is the boundary

location of the RPE segmented in the same manner as CIRRUS HD-OCT structural
images. 
NOTE: This preset is not available for ONH Angiography.

• Avascular: The inner surface of the Avascular slab is the estimated OPL. The outer

surface is the boundary between the inner and outer segment junctions (IS/OS), the
position of which is estimated as:

Z

IS/OS

= Z

RPEfit 

– 70 

μ

m

Summary of Contents for CIRRUS HD-OCT 500

































































































































































































































































































































































Reviews: