ST950S Plus+ Installation and Commissioning Manual
If required, remove the CPU Card and fit the optional RTC battery backup kit (section
Load the IC4 configuration (section
Load the Plus+ Site Layout Configuration (section
)
Add the required Licence(s) (section
)
If required, configure the communications systems (e.g. IP data) (section
)
If required, configure and start MOVA referring to the MOVA handbook - 667/HB/46000/003
If required, configure and start UTC referring to the UTMC OTU handbook - 667/HB/46000/004
If required, start the Controller Monitor application to report controller status to Stratos – the application
control is found via the web page; Systems → Applications.
Set the controller date and time (section
Bag all signal heads
Perform Lamp tests to ensure correct configuration (section
Perform Solar Cell testing (section
)
Perform Junction Testing (section
)
Extract site information for review with customer (section
When satisfied with the configuration and operation of the controller, consider refreshing the latest
restore point and retaining it so that this configuration can be restored if necessary. See the ST950
User Interface Handbook (667/HU/46000/000) for further information.
6.9.2. RTC battery backup kit
The optional battery backup kit for the RTC is provided with a lithium coin cell (CR2032 or equivalent)
that is fitted into a socket on the ST950 CPU Card. Without this optional kit the RTC is maintained using
Supercaps which will provide 48hrs of backup in the event of a power failure. If the RTC is required to
be backed up for longer periods, this kit should be used and the coin cell fitted as shown below:
Important:
With the optional RTC battery backup in place the RTC backup period will be in excess of three
years. The recommended battery replacement period is three years
Ensure that the coin cell is correctly oriented – positive side uppermost as shown in the sequence of
photos below.
Page 116