ST950S Plus+ Installation and Commissioning Manual
Table 5. A Table of definitions (continued)
Item
Definition
CIC
Configuration Identity Code (equivalent to EM above)
GVP
Generic Versatile Platform - used by ST950 and other Yunex Traffic products to
provide general services such as comms, user interface, etc.
STS
(Site to Scale)
A scale drawing of the intersection including controller position, detector loop po
sitions and specification, cable routing and poles with signal head arrangements.
Word
Two-byte data array (i.e. bits 0-15 constitutes a data word)
Works Specifica
tion
Document produced by Yunex Traffic, which details the hardware required for the
controller and includes Site Data, usually in the form of a printout of the data en
tered on the configurator.
1.4. Pre-Requisites
Anyone undertaking installation, commissioning and first line maintenance on the ST950 family of
controllers will need knowledge or access of a range of user handbooks. In particular the ST950 User
Interface Handbook (667/HU/46000/000), which provides details of how to connect to the controller and
the different user interfaces which are available.
1.4.1. Qualifications
Only skilled or instructed personnel with relevant technical knowledge and experience, who are also
familiar with the safety procedures required when dealing with modern electrical/electronic equipment,
are to be allowed to use and/or work on the equipment. All work shall be performed in accordance with
the Electricity at Work Regulations 1989 or the relevant local, state and government regulations.
Any personnel working on the ST950 family of controllers should have completed the following training
courses
:
•
HA Sector Scheme Sector 8 Modules 5XX
•
M609 – Junction Traffic Controller Maintenance for ST950 / ST950 Plus
+
1.4.2. Required Tools
In addition to a standard Engineer’s tool kit, the following tools are required when carrying out any work
on the ST950 family of controllers.
User Interface
One of the following is required depending on the user interface chosen to be used during the
installation.
Training Requirements for non-UK users may be different
Page 24
