ST950S Plus+ Installation and Commissioning Manual
Figure 104. Nearside with Fixings Identified
•
Remove the PCB and replace. Replacement is the reversal of removal.
Note:
Note the Nearside Green and Red sections are held together with a permanent ribbon cable
connection and cannot be separated. The two parts are fixed together using plastic friction-lock
fixings for secure shipment.
Note:
For a single Node, the process to acknowledge an update does not require prior knowledge of
the Serial Number. However, it is good practice to note the New Serial Number and update any
backups of the Design Layout (paper or Electronic). If multiple nodes are being replaced, then
the Serial Number will need to be noted for configuration update.
Page 165
