ST950S Plus+ Installation and Commissioning Manual
of up to 32 Phases. The MIMICS connect directly to the MIMICS RJ45 connector on first CTB position.
However, any CIC populated CTB interface can be used if considered convenient.
The MIMIC is located in its dedicated position as per image below.
The MIMIC indicator panel kit can be fitted at the factory or as a field option for later installation.
The MIMIC LEDs can be configured so that they can be extinguished automatically while the cabinet
door is closed to save power;
Figure 32. MIMIC Indicator Panel
3.17.2. Installation
The MIMIC indicator panel kit (667/1/53142/000) consists of the PCB mounted on a metal mounting
plate and 4x M2.5 fixing screws with lock washers.
In an ST950S/SP Cabinet, the MIMIC Indicator panel can retrofitted to the main front panel by
removing the breakout panel using cutters.
The RJ45 socket for the mimics is on the rear of the PCB, a 3m RJ45 patch cable is provided to
connect the MIMIC to the MIMICS RJ45 connector on the first CTB (Reference
).
Page 73
