York Millennium YCAJ150, Installation Operation & Maintenance, Page: 98 / 116

98 YORK INTERNATIONAL
OPTIONAL DECORATIVE TAMPEPROOF ENCLOSURE
(LOUVERED & WIRE GRILLE)
General
A combination louvered and wire grille enclosure is avail-
able for the chiller for the prime purpose of deterring un-
authorized access to components of the chiller.
Kit 475-23836-000 is the decorative/tamperproof enclo-
sure which consists of a combination of louvered sheet
metal panels and weather resistant wire grilles along with
mounting hardware. This kit has a further purpose of pre-
senting a pleasing appearance to the chiller when it is
located in a highly visible area.
Installation
1. Before starting installation, all of the items in the kit
should be identified by comparing with Fig. 37a, 37b,
and 37c.
2. All holes for mounting kit parts are provided in both
the chiller frame and the added supports, therefore,
it should be unnecessary to drill holes.
3. Install the louvered panels and wire grilles using the
proper hardware and supports. Refer to Fig. 37a,
37b, 37c and the Parts List for placement of the
grilles/panels and the proper hardware required. Dis-
card existing grilles to attach the louvered panels
where necessary.
4. Notch grilles to suit water connection and wiring
harnesses as needed.
5. If the High Ambient Sunshield Kit or Disconnect
Option is installed, field adaptation will be required
where parts of the kits interfere. Touch up exposed
metal parts to prevent rust.