York Millennium YCAJ150, Installation Operation & Maintenance, Page: 11 / 116

FORM 150.65-NM4
11 YORK INTERNATIONAL
WEIGHT DISTRIBUTION (Kg)
WATER
CONN.
MODEL YCA
INLET/OUTLET
A B C D E F G H
DIA. (INCHES)
J150 812 822 836 966 788 849 859 912 8
J160 854 869 885 1011 818 884 896 948 8
J180 880 900 907 1027 898 989 997 1021 8
J190 880 900 908 1031 898 989 997 1025 8
J200 919 943 949 1073 964 1071 1078 1097 8
J220 919 943 949 1073 964 1071 1078 1097 8
J230 950 974 981 1107 978 1085 1104 1116 8
CHILLER X
J150 432 mm
J160 432 mm
J180 457 mm
J190 457 mm
J200 470 mm
J220 470 mm
J230 470 mm
DIMENSIONS
(SI)
LD01196
LD01197
LD01198
LD01199
NOTES:
1. Clearances – Recommended YORK clearances for peak per-
formance, reliable operation, and maintenance:
Side to wall – 2440 mm; Rear to wall – 2440 mm; Control panel
end to wall – 1525 mm; Over the top – no obstructions al-
lowed; Two units side by side – 3660 mm, (walls should be no
higher than the unit). The area within the clearances and under
the unit(s) must be kept clean of clutter. Additional height should
be included to allow for snow accumulation for units which are
expected to operate at full load during the winter. Reduced clear-
ances may be used due to jobsite restrictions. The unit(s) with
optional controls will allow optimal operation preventing the con-
denser pressure from exceeding the maximum limit. The units
will continue to operate without nuisance high pressure cutout
even though the airflow may be restricted at these conditions.
2. Cooler liquid connection sizes (inlet & outlet) 203 mm victaulic for
all models.
3. Drawings not to scale and are for planning purposes only. Con-
tact nearest YORK Sales Office for detailed drawings.
4. Spring isolator (optional) will increase height of unit by approxi-
mately 152 mm.
5. Modules have 29 mm space between to facilitate maintenance.
CAUTION
FAILURE TO HEED ABOVE RECOMMENDED CLEARANCES MAY RESULT IN
REDUCED SYSTEM PERFORMANCE, NUISANCE SHUTDOWNS, AND SERVICE PROBLEMS.