YOKOGAWA UP35A, User Manual

Page: 11 / 412

viii
IM 05P02D41-01EN
Coating Treatment
(1) HumiSeal coating treatment
Apply HumiSeal coating to the printed circuit board assembly.
Do not apply HumiSeal coating to the following parts: connector, gold-plated contact
area, relay part, RJC device, and in the vicinity of the push switch/LED lamp.
(2) Apply terminal coating to the gold-plated contact area on the printed circuit board.
Notes
▪ There are two treatments as described above, but we do not guarantee their effectiveness.
We do not supply any test data on these treatments.
▪ Do not apply any treatment to the screw terminal area on the back side of the instrument.
Accessories
The product is provided with the following accessories according to the model and suffix
codes. Check that none of them are missing or damaged.
1 2
4
3
No. Product Name Quantity Remark
1 Brackets 2
Part number: L4502TP (For fixing the upper and
lower parts)
2 Unit label 1 Part number: L4502VZ
3 Tag label 1 Part number: L4502VE (Only when ordered.)
4 Operation Guide 1
Single-loop control (A3 size, x7) (Standard model
only)
How to use the unit label
• Affixing the unit label
Affix the unit label to the front panel. If necessary, combine with unit prefixes. Affix it so
that the LCD area is not blocked.
• Affixing the unit label to the UP32A
Affix the unit label over the letters “PV” on the front panel.
• Maintenance port seals
Maintenance port seals (two spares) are available. Use them if the seal affixed to the
UTAdvanced controller loses its adhesiveness.
• TAG No. labels
TAG No. labels (two pieces) are available. Use them if necessary.