manualshive.com logo in svg

YOKOGAWA DL850E, User Manual

The YOKOGAWA DL850E is a versatile and reliable data acquisition system designed for various industrial applications. With its comprehensive workbook and detailed user manual available for free download on our website, users can effortlessly access a wealth of information to maximize their experience with this exceptional product.

Share
Download
background image

17-3

IM DL850E-01EN

•   Wiring unit Σ measurement functions

  The following 24 measurement functions are available.
  UΣ (average voltage): UrmsΣ (rms value),* UmnΣ (rectified mean value calibrated to the rms value),* UdcΣ 

(simple average), UacΣ (AC component)

  IΣ (average current): IrmsΣ (rms value),* ImnΣ (rectified mean value calibrated to the rms value),* IdcΣ (simple 

average), IacΣ (AC component)

  PΣ (total active power), SΣ (total apparent power), QΣ (total reactive power), λΣ (average power factor), φΣ 

(average phase difference)

  WPΣ (total integrated power), WP+Σ (total positive integrated power), WP-Σ (total negative integrated power), 
  qΣ (total integrated ampere-hour), q+Σ (positive total integrated ampere-hour), q-Σ (negative total integrated 

ampere-hour), 

  WSΣ (total apparent energy), WQΣ (total reactive energy), ZΣ (average impedance), RSΣ (average series 

resistance), XSΣ (average series reactance), RPΣ (average parallel resistance), XPΣ (average parallel 
reactance)

*   You can select either the rms value or the rectified mean value calibrated to the rms value (but not both). In 

either case, the value is displayed as rms.

•   Delta math measurement functions

  For details on line voltages and R, S, and T points, see the 

wiring system

 figure provided later.

 

3P3W→3V3A

  The following 8 measurement functions are available.
  Urs (R-S line voltage):  Urms3 (rms value),* Umn3 (rectified mean value calibrated to the rms value),* Udc3 

(simple average), Uac3 (AC component)

  It (phase current): Irms3 (rms value),* Imn3 (rectified mean value calibrated to the rms value),* Idc3 (simple 

average), Iac3 (AC component)

 

3V3A→3P4W

  The following 13 measurement functions are available.
 

Ur (R-N voltage):  Urms1 (rms value),* Umn1 (rectified mean value calibrated to the rms value),* Udc1 (simple 

average), Uac1 (AC component)

 

Us (S-N voltage):  Urms2 (rms value),* Umn2 (rectified mean value calibrated to the rms value),* Udc2 (simple 

average), Uac2 (AC component)

 

Ut (T-N line voltage):  Urms3 (rms value),* Umn3 (rectified mean value calibrated to the rms value),* Udc3 

(simple average), Uac3 (AC component)

 

In (neutral line current)

 

3P4W→3V3A

  The following 13 measurement functions are available.
 

Urs (R-S voltage):  Urms1 (rms value),* Umn1 (rectified mean value calibrated to the rms value),* Udc1 (simple 

average), Uac1 (AC component)

 

Ust (S-T voltage):  Urms2 (rms value),* Umn2 (rectified mean value calibrated to the rms value),* Udc2 (simple 

average), Uac2 (AC component)

 

Utr (T-R line voltage):  Urms3 (rms value),* Umn3 (rectified mean value calibrated to the rms value),* Udc3 

(simple average), Uac3 (AC component)

 

In (neutral line current)

*   You can select either the rms value or the rectified mean value calibrated to the rms value (but not both). In 

either case, the value is displayed as rms.

•   Other measurement functions

  The following 3 measurement functions are available.
  η (efficiency): Motor efficiency, power efficiency
  Uubf (three-phase voltage unbalance factor)
  Iubf (three-phase current unbalance factor)

17  Power Math

Summary of Contents for DL850E















































































































































































































































































Reviews:

No comments

Related manuals for DL850E

EAW UX8800 Quick Start Manual preview
UX8800
Brand: EAW Pages: 2
abc 907 Instructions For Use Manual preview
907
Brand: abc Pages: 28
Additel 226 User Manual preview
226
Brand: Additel Pages: 107
Kärcher SP 16.000 Dirt Manual preview
SP 16.000 Dirt
Brand: Kärcher Pages: 148
Kamar LW0034 User Manual preview
LW0034
Brand: Kamar Pages: 2
Harken Ti-Lite Carbo AirBlock 351 Instructions preview
Ti-Lite Carbo AirBlock 351
Brand: Harken Pages: 2
Champlain ACM-41A Quick Start Manual preview
ACM-41A
Brand: Champlain Pages: 4
Somogyi Elektronic home FLP 1600 SOLAR Instruction Manual preview
home FLP 1600 SOLAR
Brand: Somogyi Elektronic Pages: 15
RAK RAK10701-P Quick Start Manual preview
RAK10701-P
Brand: RAK Pages: 50
Tuttnauer LABSCI 15LV Operation And Maintenance Manual preview
LABSCI 15LV
Brand: Tuttnauer Pages: 96
Dr.X Works BHW-L Product Manual preview
BHW-L
Brand: Dr.X Works Pages: 14
Frontier BB2272 Operator'S Manual preview
BB2272
Brand: Frontier Pages: 16
Norwest Pivot track filler Owner'S Manual preview
Pivot track filler
Brand: Norwest Pages: 16
ResMed AirSense 11 Manual preview
AirSense 11
Brand: ResMed Pages: 9
MAHLE ArcticPro 200yf Quick Manual preview
ArcticPro 200yf
Brand: MAHLE Pages: 2
Kaya Safety Rock P-451 AS User Manual preview
Rock P-451 AS
Brand: Kaya Safety Pages: 5
T.I.P. GROOM-IT Operator Instructions Manual preview
GROOM-IT
Brand: T.I.P. Pages: 17
Lyt-Or ARTEMIS 3 User Manual preview
ARTEMIS 3
Brand: Lyt-Or Pages: 10

Brands by name

Popular brands

Load more brands