manualshive.com logo in svg

YOKOGAWA DL850E, User Manual

The YOKOGAWA DL850E is a versatile and reliable data acquisition system designed for various industrial applications. With its comprehensive workbook and detailed user manual available for free download on our website, users can effortlessly access a wealth of information to maximize their experience with this exceptional product.

Share
Download
background image

12-5

IM DL850E-01EN

Window Function (Window)

•  Damping Rate (Damping Rate)

  You can configure this setting when Window is set to Exponential. You can set the value in the range of 1 to 

100% (1% resolution). The weight of the last data point is used as a damping rate, with the weight of the first 
data point of the FFT computation taken to be 100% (= 1). When the damping rate is set to 100%, the window 
functions like a rectangular window. This setting applies to the input and output (response) signals.

•  Force1

  You can configure this setting when Window is set to Exponential. Set the area over which computation is 

performed in terms of a percentage from the first FFT point, taking the number of FFT points to be 100%. You 
can set the area to a value from 1 to 100% (in 1% steps). When the area is set to 100%, the window functions 
like a rectangular window. The outer area is the average of the results of the window function for the data 
outside the area. This setting applies to the input signals (first parameter) of one-waveform and two-waveform 
FFTs.

•  Force2

  You can configure this setting when Window is set to Exponential. This setting applies to the output (response) 

signal (second parameter) of a two-waveform FFT. It can be set in the same manner as Force1.

FFT computation data points

Damping 

rate

(%)

Force (%)

100%

W

eight

0

1

100%

Average (Average)

FFT analysis data can be linearly or exponentially averaged, and its peak values can be computed.
These settings are the same as those for user-defined computation.

12  FFT

Summary of Contents for DL850E















































































































































































































































































Reviews:

No comments

Related manuals for DL850E

IDEAL 61-521 Instruction Manual preview
61-521
Brand: IDEAL Pages: 12
Teac CD-RW880 Owner'S Manual preview
CD-RW880
Brand: Teac Pages: 44
Te Pari Racewell HD3 Quick Setup Manual preview
Racewell HD3
Brand: Te Pari Pages: 6
Yamaha MCX-C15 - MusicCAST Network Audio Player Owner'S Manual preview
MCX-C15 - MusicCAST Network Audio Player
Brand: Yamaha Pages: 65
Yamaha Audiogram6 Manuel Du Propriétaire preview
Audiogram6
Brand: Yamaha Pages: 24
VelociRAX Light Bar Instruction Manual preview
Light Bar
Brand: VelociRAX Pages: 4
ABM Katana User Manual preview
Katana
Brand: ABM Pages: 17
Dräger Medical Narkomed GS Setup And Installation Manual preview
Narkomed GS
Brand: Dräger Medical Pages: 92
Gfp ESD-1207E Assembly Instructions Manual preview
ESD-1207E
Brand: Gfp Pages: 14
SUHNER MACHINING UA 100 CNC Technical Document preview
UA 100 CNC
Brand: SUHNER MACHINING Pages: 30
Vectra Fitness on-line 1250 Owner'S Manual preview
on-line 1250
Brand: Vectra Fitness Pages: 18
TBI PRO Engineering Indoor Bug Zapper Quick Start Manual preview
Indoor Bug Zapper
Brand: TBI PRO Engineering Pages: 2
Santa Medical PM-180 Operating Manual preview
PM-180
Brand: Santa Medical Pages: 7
dbx 231s Brochure & Specs preview
231s
Brand: dbx Pages: 2
Seiler SEILER IQ Installation Instructions Manual preview
SEILER IQ
Brand: Seiler Pages: 7
CHART Nomad 830G MP Product Manual preview
Nomad 830G MP
Brand: CHART Pages: 30
Larson Electronics LEDHWP-900-DNMS Instruction Manual preview
LEDHWP-900-DNMS
Brand: Larson Electronics Pages: 3
Dicarre Airmesh Pocket DE05 User Manual preview
Airmesh Pocket DE05
Brand: Dicarre Pages: 2

Brands by name

Popular brands

Load more brands