manualshive.com logo in svg

YOKOGAWA DL850E, User Manual

The YOKOGAWA DL850E is a versatile and reliable data acquisition system designed for various industrial applications. With its comprehensive workbook and detailed user manual available for free download on our website, users can effortlessly access a wealth of information to maximize their experience with this exceptional product.

Share
Download
background image

20-6

IM DL850E-01EN

Network Printer (Net Print)

You can print screen captures on a network printer.
The DL850E/DL850EV can print to the following printers.
  EPSON Inkjet printers (EPSON Inkjet)
  HP inkjet printers (HP Inkjet)
  HP laser printers (HP Laser)

LPR servers (LPR Server)

Specify the IP address of the printer server that the DL850E/DL850EV will connect to. In a network with a DNS 
server, you can specify the host name and domain name instead of the IP address.

  LPR is a protocol used to print over a TCP/IP network.

LPR Name (LPR Name)

The name of the shared printer that the DL850E/DL850EV will connect to.

Timeout (Timeout)

If the DL850E/DL850EV cannot print for a certain amount of time, it disconnects from the network printer.

Network Drive (Net Drive)

You can save waveform data and setup data to a network drive.

FTP Server (FTP Server)

Specify the IP address of the FTP server on the network that you want to save waveform or setup data to. In a 
network with a DNS server, you can specify the host name and domain name instead of the IP address.

Login Name (Login Name)

Specify the login name. The characters that you can use for the password are all the ASCII characters on the 
keyboard.

Password (Password)

Specify the password that corresponds to the login name. The characters that you can use for the password are 
all the ASCII characters on the keyboard.

Passive Mode (Passive)

Turn passive FTP on or off.
In passive mode, the FTP client sets the port number for data transfer. Enable passive mode when you have set 
an external FTP server as a network drive or when you are accessing an FTP server through a firewall.

Timeout (Time Out)

If the DL850E/DL850EV cannot transfer files for a certain amount of time, it disconnects from the FTP server.

Connecting to the Network Drive(Connect/Disconnect)

When you press the Connect button, the DL850E/DL850EV connects to the specified network drive, and the 
drive appears in the file list (File List). When you press the disconnect button, the network drive is disconnected 
and removed from the file list (File List).

20  Ethernet Communication (Optional)

Summary of Contents for DL850E















































































































































































































































































Reviews:

No comments

Related manuals for DL850E

JB Systems Sirius Operation Manual preview
Sirius
Brand: JB Systems Pages: 7
3B SCIENTIFIC PHYSICS 1023095 Instruction Sheet preview
1023095
Brand: 3B SCIENTIFIC PHYSICS Pages: 36
3A HEALTH CARE HAPPYNEB III Instruction Manual preview
HAPPYNEB III
Brand: 3A HEALTH CARE Pages: 16
360 Systems Short/cut 2000 Audio Editor Specification preview
Short/cut 2000 Audio Editor
Brand: 360 Systems Pages: 4
Radial Engineering HDI Owner'S Manual preview
HDI
Brand: Radial Engineering Pages: 16
R&S SMB100B Getting Started preview
SMB100B
Brand: R&S Pages: 61
Teac HS-2 Brochure preview
HS-2
Brand: Teac Pages: 9
Tascam SS-R1 Specifications preview
SS-R1
Brand: Tascam Pages: 3
Tascam DR-680 Owner'S Manual preview
DR-680
Brand: Tascam Pages: 56
Tascam Portastudio 2488 Reference Manual preview
Portastudio 2488
Brand: Tascam Pages: 28
Tascam DR-08 Release Note preview
DR-08
Brand: Tascam Pages: 2
Tascam DA-3000 Spec Sheet preview
DA-3000
Brand: Tascam Pages: 5
Tascam CD-RW901 Technical Documentation preview
CD-RW901
Brand: Tascam Pages: 3
Tascam CD-RW901 Specifications preview
CD-RW901
Brand: Tascam Pages: 2
Tascam DA-98HR Service Manual preview
DA-98HR
Brand: Tascam Pages: 107
Tascam DA-38 Quick Tips preview
DA-38
Brand: Tascam Pages: 9
Tascam BB-1000CD Owner'S Manual preview
BB-1000CD
Brand: Tascam Pages: 56
Tascam 238 Owner'S Manual preview
238
Brand: Tascam Pages: 30

Brands by name

Popular brands

Load more brands