6-3
IM DL850E-01EN
Turning the Scale Value Display On and Off (Scale Value)
You can display the upper and lower limits (scale values) of each waveform’s vertical or horizontal axes.
• ON: Displays the scale values
• OFF: Does not display the scale values
Waveform Arrangement, Color, and Display Gr. (Trace Setup)
You can set the following items for the input channels (CH1 to CH16) of the modules installed in the slots and for
the computation channels (Math1 to Math8).
Mapping Mode (Mapping Mode)
Set how to map channels to the divided screens on the mapping list.
• Auto
The waveforms whose displays are turned on are arranged by number from the top of the window.
* For sub channels, even if the waveform display (Display) is set to ON. if the input coupling (Coupling) or
input (Input) is set to OFF, the sub channels will be deleted from the mapping list when the Auto Grouping
soft key is pressed.
• User
The waveforms are arranged according to the user-specified
.
Moving Input Channels (CH)
You can move input and computation channels. To move a channel, remove it from the list, and then select it in
the location that you want to move it to.
Display Color (Color)
You can set the display color of each of the waveforms to one of 16 colors.
You can assign all waveforms regardless of whether their displays are turned on.
• This can be set for each sub channel for the 16-CH voltage input module, 16-CH temperature/voltage input
module, CAN bus monitor module, and CAN & LIN bus monitor module.
• Because logic input modules are not displayed as individual bits but are instead displayed as single channels,
a logic input channel can have only one color assigned to it.
Map (Map)
When the mapping mode is set to User, you can set how to map each waveform to the divided screens. You can
assign all waveforms regardless of whether their displays are turned on.
• This can be set for each sub channel for the 16-CH voltage input module, 16-CH temperature/voltage input
module, CAN bus monitor module, and CAN & LIN bus monitor module.
• Because logic input modules are not displayed as individual bits but are instead displayed as single channels,
a logic input module can be assigned only to one zone.
Display Groups (Select Display Gr.)
Only the waveforms of the selected group are displayed on the screen.
All the channels (CH, Math, and sub channels) are automatically assigned to groups 1 to 4. You can change
these assignments. P and H are displayed on models with the /G5 option.
Group 1 to 4 (Group #1 to #4)
Specify the channels (CH, Math, and sub channels) that are assigned to each group. You can also automatically
reassign just the waveforms of the channels (CH, Math, and sub channels) whose displays are turned on to
groups 1 to 4.
• You can assign the same channel to multiple groups.
• You cannot assign the following channels to separate groups.
The bits of a single logic input module
6 Display
