YOKOGAWA DL850E User Manual Download Page 73 | Manualshive

Page: 73 / 270

background image

2-56

IM DL850E-01EN

Real Time Math (RealTime Math)

Turning Real Time Math On and Off

Select whether to use real time math.
• ON: Select this item to display a menu for configuring real time math. At the same time, real time math

execution begins.

• OFF: Select this item to display a menu for configuring the standard model. Real time math is not executed.

You can perform real time math operations in which the waveforms of input channels or the results of other real
time math operations are used as the math source waveforms. This is one of the features of the /G3 option. The
other feature is the

digital filter and delay

• Configure the settings for each channel. You can perform math operations on up to 16 channels at the same

time.

• When you turn real time math on, the real time math results are output to the real time math channels (the

channels that you have turned math on for). The waveforms of input channels that you have turned math on
for are not displayed. They are also not saved. For example, if you turn real time math on for input channel
CH2, CH2 becomes the RMath2 real time math channel, and the math results are displayed on the screen.
The data that is saved is that of the math result. If you want to display and save the waveform of the input
channel, set the real time math to a channel that has no input.

• You can set the real time math source waveforms to the input channels of 16-CH voltage input, 16-CH

temperature/voltage input, CAN bus monitor, and CAN & LIN bus monitor module, but you cannot set the
channel that the real time math result is output on to an input channel of a 16-CH voltage input, 16-CH
temperature/voltage input, CAN bus monitor, or CAN & LIN bus monitor module (there is no menu for turning
real time math on).

• For details on the modules whose channels you can set as real time math sources, see “Notes Regarding

Using the Digital Filter and Real Time Math”

• Even during waveform acquisition, you can set various math conditions, such as the operator or function (the

operation definition), the source waveforms, and the coefficients. However, if you change the conditions, the
measurement count (waveform acquisition count) is reset. The measurement count is displayed in the lower
left of the screen.

• By setting the waveform that results from math operations as a trigger source, you can trigger the DL850E/

DL850EV on the results.

• For details on the math expressions, delay, and settings, see the appendix in the

Real Time Math (/G3 option)

User’s Manual

, IM DL850E-51EN.

Labels (Label)

2 Vertical Axis

«
...
71
72
73
74
75
...
»

Summary of Contents for DL850E















































































































































































































































































Reviews:

No comments

Related manuals for DL850E

Brand: Napoleon Pages: 2

Brand: Raytheon Pages: 62

Brand: XAG Pages: 24

Brand: idiag Pages: 10

Versaflo S Series

Brand: 3M Pages: 11

DBI Sala EXOFIT

Brand: 3M Pages: 32

Brand: 3M Pages: 8

Brand: Accurate Bio-Medical Technology Pages: 35

Brand: Haigh Pages: 60

AquaPure Ei Series

Brand: Jandy Pages: 4

AquaPure Ei Series

Brand: Jandy Pages: 8

Jandy Pro Series

Brand: Jandy Pages: 16

Brand: Keller Pages: 12

Brand: MacDon Pages: 49

Brand: MacDon Pages: 49

Brand: MacDon Pages: 4

Brand: laerdal Pages: 9

Brand: neofeu Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands