20-10
IM AQ1200-01EN
20.7 Performing a Mechanical Inspection and
Checking Operations
Mechanical Inspection
WARNING
Make sure that the power is off while you are inspecting the Instrument.
CAUTION
• If foreign objects are stuck in the connectors, malfunction and damage may occur.
• The Instrument may not operate properly if its connectors are loose.
French
AVERTISSEMENT
Veiller à couper le courant avant d'effectuer une inspection mécanique.
ATTENTION
• Si des corps étrangers se retrouvent emprisonnés dans les différents connecteurs, un
dysfonctionnement ou un endommagement risque de se produire.
• Si l'ajustement de l'un des différents types de connecteurs n'est pas parfait, l'instrument
risque de ne pas fonctionner normalement.
Make sure that:
• There is no external damage or deformation on the outside of the Instrument.
• There are no switches, connectors, or other components that are loose.
• All switches and moving parts can be operated smoothly.
If there are any problems, contact your nearest YOKOGAWA dealer.
Checking Operations
Turn on the Instrument, perform the typical operations, and make sure that the Instrument performs
normally.
