1-2
IM AQ1200-01EN
Checking Fiber End Faces
You can use a fiber inspection probe
*
to photograph a fiber end face and display its state on the
screen.
* For information about compatible fiber inspection probes, contact your nearest YOKOGAWA dealer.
IP Testing (/LAN option)
Simple connection testing that uses PING
PON power meter (/PPM option)
Simultaneous measurement of the optical power of different signal wavelengths (1310 nm, 1490 nm,
and 1550 nm) of a PON system
Multi-Core Fiber Measurement
Using screens and menus specific to multi-core fiber measurement, you can efficiently and completely
measure multi-core fibers.
Optical power meter (/SPM option)
Loss-measurement power meter
* This features covers firmware versions 3.01 or later of the AQ1200x/AQ1205x.
Light source (/SLS option)
Loss-measurement light source
* This features covers firmware versions 3.01 or later of the AQ1200x/AQ1205x.
1.1 Overview
