YOKOGAWA AQ1200A User Manual Download Page 83

Page: 83 / 237

6-4

IM AQ1200-01EN

Deleting Markers or the Cursor

Press the

Auxiliary Function

soft key shown on page 6-2 to display the following screen.

Delete the markers.

Delete the cursor.

Note

For details on the marker modes, see section 5.5.

Displaying Markers (Marker mode: Line)

Using the

rotary knob

and

ENTER

, select

OTDR

Press the

Marker

soft key to display the following screen.

When the suffix code is -HE, press the

Analysis

soft key and then the

Marker

soft key.

Press to switch to the screen that is

used to measure the two-point markers.

See “2 Point” later in this section.

Press to switch to the screen that is

used to measure the five-point markers.

See “5 Point” later in this section.

Switches to the screen that is used to

move the measurement reference point

Switches to the screen that is used to

delete markers and the cursor

A marker measurement outline is

displayed on the screen. For details, see

“Explanation” later in this section.

6.1 How to Operate the Cursor and Markers

Summary of Contents for AQ1200A














































































































































































































































Search results

Summary of Contents for AQ1200A

Reviews:

Related manuals for AQ1200A

Brands by name

Popular brands

YOKOGAWA AQ1200A, User Manual

Search results

Summary of Contents for AQ1200A

Reviews:

Related manuals for AQ1200A

Brands by name

Popular brands