15-1
IM AQ1200-01EN
IP
T
esting (Option)
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
App
Index
20
15.1 Performing an IP Test
Procedure
Ping Test Setup Screen
Using the
rotary knob
and
ENTER
, select
IP Test
to display the following screen.
Set the address to ping.
Set the frame length (32 to 1526 bytes)
Set the Tx Mode (Continue, Frames, Time)
• Frames: 1 to 3600
• Time: 1 to 3600 s
Set the measurement interval (100ms, 1s)
Ping test results
The results of pinging the address appear here.
Pinged address
Starts pinging
Explanation
IP testing is available on models with the /LAN option.
Use the Ethernet port to execute a ping test.
Pinging
Target Address
Specify the address that you want to ping.
Tx Frame
Set the conditions of the frame you will use for pinging.
•
Frame Length
You can set the length of the frame that will be sent in a single ping to a value within the following
range.
32 to 1526 bytes
•
Tx Mode
You can set the Tx mode to one of the following options. Depending on the Tx mode that you set,
you may set the number of frames and the time in the next menu.
Continue
Frames are sent continuously, regardless of the set number of frames and time.
Frames
1 to 3600
Time
1 to 3600 s
Measurement Interval
Set the interval at which to measure the ping test items (see the next page) to one of the following
values.
100 ms, 1 s
Chapter 15 IP Testing (Option)
