YOKOGAWA AQ1200A User Manual Download Page 84

Page: 84 / 237

6-5

IM AQ1200-01EN

aveform Analysis

App

Index

2 Point Markers

Press the

2 Point Markers

soft key shown on the previous page to display the following screen.

Set the cursor.

Turn the rotary knob to display and

then move the cursor.

Set marker n.

Turn the rotary knob to display and

then move marker n.

Set the approximation method

(see section 3.4).
Turns the cursor link on or off

Marker n

Marker E

Set marker E.

Turn the rotary knob to display and

then move marker E.

Note

When you set the marker positions, set them so that the n marker is the measurement start point (the
distance reference).

5 Point Markers

Press the

5 Point Markers

soft key shown on the previous page to display the following screen.

Press to set all markers

together.

All markers are displayed together.

Select the marker.

Press this soft key to select the

marker that you are operating.

Set the approximation method

(see section 3.4).

Turns the cursor link on or off

Marker n

Marker E

Marker N

Marker F

Marker f

Note

• Only perform collective settings on all the markers when the cursor is displayed.
• Press the soft key to select either the cursor or a marker, and then turn the rotary knob to display and

move it. “C” represents that the cursor is selected.

6.1 How to Operate the Cursor and Markers

Summary of Contents for AQ1200A














































































































































































































































Search results

Summary of Contents for AQ1200A

Reviews:

Related manuals for AQ1200A

Brands by name

Popular brands

YOKOGAWA AQ1200A, User Manual

Search results

Summary of Contents for AQ1200A

Reviews:

Related manuals for AQ1200A

Brands by name

Popular brands