YOKOGAWA AQ1200A User Manual Download Page 216

Page: 216 / 237

20-7

IM AQ1200-01EN

Troubleshooting, Maintenance, and Inspection

App

Index

20.4 Performing a Self Test

Procedure

System Setup Menu

Press

SETUP

to display the following menu.

Executes a self test

Explanation

The Instrument checks the operation of the:

•  Internal memory.
•  RTC (real time clock) battery.
•  Battery pack voltage.

Note

Perform a self test with the battery pack installed in the Instrument.
If the battery pack is not installed, the test will result in error.

If the results of the self test are normal, “Test succeeded” appears. If an error occurs, “Test Error
occurred” appears.

When an Error Occurs during a Self Test

If an error occurs, contact your nearest YOKOGAWA dealer.

Summary of Contents for AQ1200A














































































































































































































































Search results

Summary of Contents for AQ1200A

Reviews:

Related manuals for AQ1200A

Brands by name

Popular brands

YOKOGAWA AQ1200A, User Manual

Search results

Summary of Contents for AQ1200A

Reviews:

Related manuals for AQ1200A

Brands by name

Popular brands