16-1
IM AQ1200-01EN
Multi-Core Fiber Measurement
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
App
Index
20
16.1 Creating a New Project
Procedure
Main View Screen
1.
Using the
rotary knob
and
ENTER
, select
Multi-Core Fiber Meas
. The following screen
appears.
The last measurement project appears.
If you are using this feature for the first time after purchase or if the settings have been initialized,
“NewProject” will appear. “NewProject” is an empty project.
Set the wavelength.
You can select one of the
wavelengths that have been set in the
measurement conditions or “All.”
The drive/folder name/project name of the current project
Core number
The core number at the cursor location is highlighted.
Create a new project.
Specifies skip
You can select this soft key when the cell at
the cursor location does not have a check
mark or when there is no pass/fail judgment
result indication.
To cancel skipping, press this soft key again.
Creating a New Project
2.
Press the
New Project
soft key. The following screen appears. Change the project name by
following the procedure in section 2.4.
Initialize setting
Initializes the settings of the current project
and creates a new project.
Takeover current setting
Duplicates the settings of the current project
to create a new project.
Cancel
Cancels the creation of a new project.
Character input dialog box
Chapter 16 Multi-Core Fiber Measurement
