17-4
IM AQ1200-01EN
Waveform Confirmation Screen
You can view waveforms to perform detailed event analysis and edit events.
5.
Press the Confirm Trace soft key. The following screen appears. The cursor appears on the
selected event on the waveform.
For details on the screen, see section 7.1.
For the procedure, see section 6.3.
For the procedure, see section 7.2.
Set the wavelength.
You can select one of the wavelengths that have
been set in the measurement conditions.
For the procedure, see section 7.1.
Multi Pulse Width Measurement (on models with the -HJ suffix
code)
This function uses multiple pulse widths to simultaneously measure near-end side events and far-end
side events. This function is only available on models with the -HJ suffix code.
Setting Measurement Conditions
• Setting FTTA Mode (Multi pulse width measurement)
2.
Press
SETUP
, the System
Setup
soft key, and then the
OTDR
soft key to display the following
screen.
3.
Using the
rotary knob
and
ENTER
, set FTTA mode to On.
Multi pulse width measurement
(On, Off)
17.1 Displaying Optical Fiber Events as Icons
