18-3
IM AQ1200-01EN
File Operation and Printing
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
App
Index
20
18.2 Saving and Loading Data
When you have selected the multi-core loss test feature from the top screen or top
menu
Press
SETUP
and the
File
soft key. Or, press
SETUP
twice. The following screen appears.
Set the destination drive (internal
memory, USB memory).
Set the file name (see the File Name
Setup screen in the next section).
Saves the file
For the procedure to load files, see section
12.2.
Using the
rotary knob
and
ENTER
, select
the file save destination.
Folder path
The number of folders and files in the selected folder
The file name candidate for the next save operation
File Name Setup Screen
When you are using the OTDR, fault-locator or event mapper feature
Set the parts of the file name (ID No., Wavelength,
Comment, Company Name, Name, Cable ID, Fiber
ID, Cable Code, Originating Loc, Terminating Loc).
Set the items that will be entered into part , , and
of the file name.
Set the separator ( , _ _ , ~ ~ ,
^ ^ ).
Set the ID number (0 to 9999).
Set the tape number type (Off, a-b(2), a-c(3), a-d(4),
a-e(5), a-f(6), a-g(7), a-h(8)).
Set the tape number start character.
Set, within the specified tape number type range, the
tape number start character that will be attached to the
file name.
Set the comment (up to 30 characters).
To enter a comment, follow the procedure in section
2.4.
File name
The file name that is determined by the above settings
is displayed.
1
2
3
1 2 3 1
2
3 1
2
3
1
2
3
Press to configure the label.
On the screen that appears, enter the values for
the items according to the instructions in section
2.4 and select which items will be displayed on
the screen. The label items are company name,
name, cable ID, fiber ID, fiber type, cable code,
start position, end position, and current data flag.
When you are using a feature other than the OTDR or fault-locator feature
Set the file name format (No., Comment,
C No., No. + Comment).
Set the ID number (0 to 9999).
Specify a comment (up to 30 characters).
To enter a comment, follow the procedure in section 2.4.
File Name
The file name that is produced by the above settings is
displayed.
