5-57
CHAS
SWINGARM
5. Install:
9
Relay arm
1
9
Bolt (relay arm)
2
9
Plain washer
3
9
Nut (relay arm)
4
To swingarm.
NOTE:
9
Apply the molybdenum disulfide grease on the
bolt.
9
Do not tighten the nut yet.
6. Install:
9
Swingarm
1
9
Pivot shaft
2
NOTE:
9
Apply the molybdenum disulfide grease on the
pivot shaft.
9
Insert the pivot shaft from right side.
7. Check:
9
Swingarm side play
a
Free play exists
→
Replace thrust bearing.
9
Swingarm up and down movement
b
Unsmooth movement/Binding/Rough
spots
→
Grease or replace bearings, bushes
and collars.
8. Install:
9
Bolt (connecting rod)
1
9
Plain washer
2
9
Nut (connecting rod)
3
NOTE:
9
Apply the molybdenum disulfide grease on the
bolt.
9
Do not tighten the nut yet.
9. Install:
9
Plain washer
1
9
Bolt (rear shock absorber-relay arm)
2
NOTE:
9
Apply the molybdenum disulfide grease on the
bolt.
9
Insert the bolt from right side.
85 Nm (8.5 m•kg, 61 ft•lb)
53 Nm (5.3 m•kg, 38 ft•lb)
5MW-9-30-5D 7/6/00 11:28 AM Page 12
