2-14
CABLE ROUTING DIAGRAM
SPEC
1
CDI magneto lead
2
YPVS breather hose
3
Clamp
4
Clutch cable
5
Radiator breather hose
6
CDI unit lead
7
Cable guide
A
Pass the radiator breather hose
outside the engine bracket and
inside the down-tube.Pass the
radiator breather hose inside
the CDI magneto lead.
B
Clamp the CDI magneto lead,
radiator breather hose and
YPVS breather hose. In so
doing, clamp the CDI magneto
lead at the rear of the down-
tube with the clamp ends for-
ward.
C
Clamp the radiator breather
hose and CDI magneto lead at
the rear of the down-tube with
the clamp ends outward.
D
Pass the clutch cable a little for-
ward of the extreme left nut that
holds the cylinder head.
E
Pass the radiator breather hose
and CDI magneto lead in front
of the radiator hose.
F
Pass the radiator breather hose
and CDI magneto lead between
the frame and radiator.
G
Align the top of the brake hose
neck with the brake hose holder
bottom.
H
Pass the brake hose in front of
the axle boss,then fit it into the
hose groove so that the brake
hose does not contact the nut
(wheel axle).
I
Fit the brake hose into the guide
on the protector.
5MW-9-30-2 7/3/00 2:25 PM Page 52