5-25
CHAS
FRONT BRAKE AND REAR BRAKE
2. Install:
9
Brake hose holder
1
9
Screw (brake hose holder)
2
c
C
After installing the brake hose holders,
make sure the brake hose does not contact
the spring (rear shock absorber). If it does,
correct its twist.
EC5A5600
Brake fluid
1. Fill:
9
Brake fluid
Until the fluid level reaches “LOWER” level
line
a
.
w
9
Use only the designated quality brake fluid:
otherwise, the rubber seals may deterio-
rate, causing leakage and poor brake per-
formance.
9
Refill with the same type of brake fluid;
mixing fluids may result in a harmful chemi-
cal reaction and lead to poor performance.
9
Be careful that water does not enter the
master cylinder when refilling. Water will
significantly lower the boiling point of the
fluid and may result in vapor lock.
c
C
Brake fluid may erode painted surfaces or
plastic parts. Always clean up spilled fluid
immediately.
A
Front
B
Rear
4 Nm (0.4 m•kg, 2.9 ft•lb)
Recommended brake fluid:
DOT #4
5MW-9-30-5A 7/6/00 9:00 AM Page 50