2-13
CABLE ROUTING DIAGRAM
SPEC
EC240000
CABLE ROUTING DIAGRAM
1
Cable guide
2
Clamp
3
“ENGINE STOP” button lead
4
Throttle cable
5
TPS (throttle position sensor)
lead
6
Solenoid valve lead
7
CDI unit
8
CDI unit stay
9
CDI unit band
0
Air vent hose (left)
q
Transmission oil breather hose
w
Overflow hose
e
Air vent hose (right)
A
Pass the throttle cable and
“ENGINE STOP” button lead into
the cable guide. Align with the
cable guide the front end of the
tape on the throttle cable.
B
Clamp the throttle cable,
“ENGINE STOP” button lead and
CDI unit lead with the clamp
ends downward.
C
Pass the throttle cable, “ENGINE
STOP” button lead and CDI unit
lead over the radiator hose.
D
Clamp the clutch cable, throttle
cable, “ENGINE STOP” button
lead, TPS (throttle position sen-
sor) lead and solenoid valve lead
with the clamp ends downward.
In so doing, clamp the “ENGINE
STOP” button lead at its protect-
ing tube.
E
Clamp the clutch cable so that
the clamp passes with its ends
downward, as shown.
F
Pass the TPS (throttle position
sensor) lead and solenoid valve
lead through the cable guide.
G
Clamp the TPS (throttle position
sensor) lead and solenoid valve
lead to the frame with the clamp
ends backward.
H
Pass the solenoid valve lead
through the carburetor clamp.
I
Pass the air vent hoses, overflow
hose and transmission oil
breather hose between the frame
and connecting rod.
J
Fit the CDI unit into the CDI unit
stay till it stops.
K
Insert the CDI unit into the CDI
unit band till it stops.
L
Pass the TPS (throttle position
sensor) lead and solenoid valve
lead under the damper.
M
Clamp the air vent hoses.
N
Pass the air vent hoses, overflow
hose and transmission oil
breather hose so that all these
hoses do not contact the rear
shock absorber.
5MW-9-30-2 7/3/00 2:24 PM Page 50