background image

Mounting Instructions

Öhlins Shock Absorber Kit RS 562 

for RST Supermotard, Rear

© Öhlins Racing AB. All rights reserved. Any reprinting or unauthorized use without the

written permission of Öhlins Racing AB is prohibited. Printed in Sweden.

Öhlins Racing AB, Box 722, S-194 27 Upplands Väsby, Sweden.

Phone +46 8 590 025 00. Fax +46 8 590 025 80.

www.ohlins.com

RS 562. Issued 05 08 08

Front suspension

F1.  ATV on a stand with the
 

suspension fully extended 

 =  ............

F2.  ATV on the ground without rider = ............

F3.  ATV on the ground with rider 

 = ............

Free sag 

F1 - F2 =  ............

Ride height 

F1 - F3 =  ............

 

Setup Data

Shock absorber length 

 

344

+12

 mm

Shock absorber stroke 

 

68 mm

Recommended spring 

 

1096-59

 

Spring rate 

 

150 N/mm

 

Free spring length 

 

190 mm

Spring pre-load 

 

16 mm

Recommended free sag
 Front 

  60±5 

mm

 Rear 

  30±5 

mm

Rebound damping adjuster  

15 clicks

Compression damping adjuster
 

Low speed 

 

10 clicks

 

High speed 

 

1½ turn

Recommended Alternative Springs

Rider weight 

Spring combination

85 kg / 187 lbs 

1096-54

NOTE!

If ride height is higher than recommended, 
softer spring/springs must be used.
If ride height is lower than recommended, 
harder spring/springs must be used.
Contact your Öhlins dealer for advice.

0

F1

F2

F3

On a stand

Without rider

With rider on

R1

R2

R3

On a stand

Without rider

With rider on

Checking Sag and Ride Height

Kit Contents

Before installing the shock absorber, please 
check the contents of the kit. If anything is 
missing, please contact your Öhlins dealer.

Description Pcs. 

Part 

No.

Shock absorber 46 PRXL

 1 

RS 

562

C-spanner

 1 

00710-02

Sticker Memo notes

 1 

01180-01

Sticker Öhlins

 2 

00197-01

Owner’s manual

 

1

Before Installation

Öhlins Racing AB can not be held responsible 
for any damage to shock absorber or  vehicle, 
or injury to persons, if the instructions for fi tting 
and main tenance are not followed exactly.

 Similarly, the  warranty will become null and 

void if the  instructions are not adhered to.

Öhlins products are subject to continuous improvement and development. All information in this manual is 
based on the latest product information available at the time of approval for publishing. Consequently, there 
may be minor differences between your suspension and the suspension in this manual. Please consult 
your Öhlins dealer if you have any questions regarding the contents of this manual.

Rear suspension

R1.  ATV on a stand with the
 

suspension fully extended 

  = .............

R2.  ATV on the ground without rider = ............

R3.  ATV on the ground with rider 

 = ............

Free sag 

R1 - R2 =  ............

Ride height 

R1 - R3 =  ............

Reviews: