Configuring setting
with console
commands
The product functions can be configured by
sending commands (console commands) directly.
You can change settings via TELNET or SSH,
and also enter console commands from “Basic
configuration page” to configure settings. If you
change settings via TELNET or SSH, prepare an
appropriate software program supporting your
TELNET or SSH environment.
What is console command?
The console command is a method to configure
functions by directly sending instructions to the
product. Using console commands enables you to
configure more detailed settings than using other
methods. Please refer to “Command reference”
(included in the attached CD-ROM) for more details
on console commands.
NOTE
You should fully understand the behavior of a console
command before using it. After configuring a setting in
“Basic configuration page”, if you change the setting
with a console command, an unintended operation may
be resulted. Be sure to check whether the command
behaves as you intended after changing the setting.
Tip
The product can be configured with console commands
from a PC that is connected to the console port of the
product using a serial cable (page 146).
Register TELNET, SSH, or SFTP
users
In the “Add user” screen, register users to be
permitted to log in using TELNET or SSH. TELNET
allows a user to log in as an anonymous user
even if s/he is not registered, but SSH allows only
registered users to log in.
For more details on the settings, click “Help” on the
setup screen and refer to the description displayed.
To open the “Add user” screen
From “Basic configuration page”, click the buttons
on the setup screen in the following order:
“Advanced settings” in the top page
“Configure” of “Configure users and access
limits(HTTP, TELNET, SSH, SFTP)”
“Configure” of “Number of registered users” in
the “Configure user and password” field
FWX120 Operation Manual
143
7
Operating and managing the product
Changing the product settings
(Continued from the previous page)
