Yamaha FWX120 Page 16 Operation Manual Download

Page: 16 / 194

Now, the connecting procedures are completed.
Proceed with other preparations.



See

page

CONSOLE

SPEED

LINK/DA

STNDBY

LAN2

STANDB

CONSOLE

LAN1

Plug the power cord of this product into an electrical outlet.

Place the POWER switch in the ON position.

The POWER lamp lights up after flashing several times.

Power your PC or hub.

If the LAN1 and LAN2 lamps on the front panel light up or flash, the product is correctly
connected to your PC or hub.

If the LAN1 lamp does not light up or flash:

• Check that the LAN cable is correctly connected and your PC or hub is powered on.
• The LAN1 lamp does not light up or flash unless all the PCs and hubs that are connected

to the product are powered on.

If the LAN2 lamp does not light up or flash:

Check that the product is connected correctly to the router (hub) and the router (hub) is
powered on.

Plug into
an outlet



FWX120 Operation Manual

Connecting (to an existing network) as a transparent mode firewall

Summary of Contents for FWX120



































































































































































































Search results

Summary of Contents for FWX120

Reviews:

Related manuals for FWX120

Brands by name

Popular brands

Yamaha FWX120, Operation Manual

Search results

Summary of Contents for FWX120

Reviews:

Related manuals for FWX120

Brands by name

Popular brands