manualshive.com logo in svg

Yamaha FWX120, Operation Manual

The Yamaha FWX120 Operation Manual is your go-to resource for understanding and maximizing the features of this impressive product. Offering a free download, this comprehensive manual provides step-by-step instructions and valuable insights to help you make the most of your Yamaha FWX120. Get your manual now at manualshive.com.

Share
Download
background image

138  

  FWX120 Operation Manual

Maximizing use of the product

6

Configuring the 

product to use IPv6

Before  beginning  configuration,  register  the 
connection  destination  (provider)  using  IPv6  in 
the “Configure IPv6” screen.

NOTE

If the provider is not registered, your IPv6 connecting 
operation will result in an error.

For more details on the settings, click “Help” on the 
setup screen and refer to the description displayed.

To open the “Configure IPv6” screen

From “Basic configuration page”, click the buttons 
on the setup screen in the following order:

 “Advanced settings” in the top page

 “Configure” of “Configure IPv6”

Checking the IPv6 

connection

Take the following steps to check whether the IPv6 
environment has been correctly configured.

NOTE

The  descriptions  in  this  manual  use  Windows  7  as 
examples.

Tip

The product and a PC can be communicated with each 
other once they are connected with a LAN cable. No 
particular settings are required in the PC.

1

  Check the connection of LAN.

From a PC connected to a LAN1 port, execute 
ping to the LAN1 address of the product.

If  a  response  is  returned,  IPv6  has  been 
configured correctly.

Tip

The  LAN1  address  of  this  product  is  a  prefix 
address with “1” added to it.
Example: If the prefix is “fec0:12ab::/64”,

•  The LAN1 address is “fec0:12ab::1/64”.
•  To  execute  ping  to  the  LAN1  address  of  the 

product,  enter  “ping  fec0:12ab::1”  from  the 
command prompt of the PC and press the Enter 
key.

2

  Check the connection between LAN and 

WAN.

Execute ping to the provider, view the special 
website,  or  take  other  checking  procedure 
specified by the provider.

Using in the IPv6 environment 

(Continued from the previous page)

Summary of Contents for FWX120



































































































































































































Reviews:

No comments

Related manuals for FWX120

D-Link NetDefend DFL-260E Datasheet preview
NetDefend DFL-260E
Brand: D-Link Pages: 6
D-Link NetDefend DFL-260E Manual preview
NetDefend DFL-260E
Brand: D-Link Pages: 198
D-Link DFL-300 - Security Appliance Quick Install Manual preview
DFL-300 - Security Appliance
Brand: D-Link Pages: 12
D-Link NetDefend SOHO DFL-160 User Manual preview
NetDefend SOHO DFL-160
Brand: D-Link Pages: 130
D-Link DFL-1600 - Security Appliance Quick Manual preview
DFL-1600 - Security Appliance
Brand: D-Link Pages: 22
D-Link DFL-700 - Security Appliance Manual preview
DFL-700 - Security Appliance
Brand: D-Link Pages: 141
D-Link DFL-210 - NetDefend - Security Appliance Cli Reference Manual preview
DFL-210 - NetDefend - Security Appliance
Brand: D-Link Pages: 213
D-Link DFL-800 - Security Appliance Quick Manual preview
DFL-800 - Security Appliance
Brand: D-Link Pages: 20
D-Link DFL-210 - NetDefend - Security Appliance User Manual preview
DFL-210 - NetDefend - Security Appliance
Brand: D-Link Pages: 469
D-Link DFL-500 Quick Install Manual preview
DFL-500
Brand: D-Link Pages: 8
Hawking DV1394A Specifications preview
DV1394A
Brand: Hawking Pages: 2
Dell SonicWALL TZ500 Quick Start Manual preview
SonicWALL TZ500
Brand: Dell Pages: 15
ZyXEL Communications ZyWALL USG 100 Series Brochure & Specs preview
ZyWALL USG 100 Series
Brand: ZyXEL Communications Pages: 6
Nexcom vDNA 1160 User Manual preview
vDNA 1160
Brand: Nexcom Pages: 81
Nexcom NSA 5150 User Manual preview
NSA 5150
Brand: Nexcom Pages: 84
Nexcom NSA 3170 User Manual preview
NSA 3170
Brand: Nexcom Pages: 73
Dell TZ 105 Specifications preview
TZ 105
Brand: Dell Pages: 8
D-Link DFL-1660-WCF-12 Datasheet preview
DFL-1660-WCF-12
Brand: D-Link Pages: 5

Brands by name

Popular brands

Load more brands