2 Enabling the DHCP server functions
2
Click
1
Specify
1
Enable the DHCP server functions.
NOTE
If “DHCP client” is selected in the “Configure firewall 1/6” screen, “Disable DHCP server
function” will be selected.
If the product is not used as a DHCP server:
Click “Disable DHCP server function” to select it.
If the product is used as a DHCP server:
Click “Use DHCP server function” to select it, and then configure the following settings:
•
Assigned IP address range:
Enter the range of IP addresses that do not overlap with
the IP address of the product in numeric characters.
•
netmask:
Select the same value as the netmask of the product.
2
Click “Next”.
The “Configure firewall 4/6” screen appears.
28
FWX120 Operation Manual
Connecting (to an existing network) as a transparent mode firewall
2
