Yamaha FWX120 Page 35 Operation Manual Download

Page: 35 / 194

CONSOLE

SPEED

LINK/DA

STNDBY

LAN2

STANDB

CONSOLE

LAN1

Plug the power cord of this product into an electrical outlet.

Place the POWER switch in the ON position.

The POWER lamp lights up after flashing several times.

Power your PC or hub.

If the LAN1 and LAN2 lamps on the front panel light up or flash, the product is
correctly connected to your PC or hub.

If the LAN1 lamp does not light up or flash:

• Check that the LAN cable is correctly connected and your PC or hub is powered on.
• The LAN1 lamp does not light up or flash unless all the PCs and hubs that are connected

to the product are powered on.

If the LAN2 lamp does not light up or flash:

Check that the ADSL modem (or cable modem or ONU) is correctly connected to the product
and the ADSL modem (or cable modem or ONU) is powered on.

Now, the connecting procedures are completed.
Proceed with other preparations.



See

page

Plug into
an outlet

FWX120 Operation Manual



Connecting to the Internet as a router

Summary of Contents for FWX120



































































































































































































Search results

Summary of Contents for FWX120

Reviews:

Related manuals for FWX120

Brands by name

Popular brands

Yamaha FWX120, Operation Manual

Search results

Summary of Contents for FWX120

Reviews:

Related manuals for FWX120

Brands by name

Popular brands