86
FWX120 Operation Manual
4
Enhancing security
Create an address group
Create it in the “Configure address group” screen.
For more details on the settings, click “Help” on the
setup screen and refer to the description displayed.
To open the “Configure address group”
screen
From “Basic configuration page”, click the buttons
on the setup screen in the following order:
“Advanced settings” in the top page
“Configure” in “Configure policy filter”
“Execute” of the interface for which you want to
view the policy filter
(Click “Execute” of “Configure and view status
of IPv4 policy filter” if IPv4 addresses are used
for connection, or “Execute” of “Configure and
view status of IPv6 policy filter” if IPv6 addresses
are used.)
“Configure” in “List of group and user definition
service”
“Add” in “Configure address group”
Create a service group
Create it in the “Configure service group” screen.
For more details on the settings, click “Help” on the
setup screen and refer to the description displayed.
To open the “Configure service group” screen
From “Basic configuration page”, click the buttons
on the setup screen in the following order:
“Advanced settings” in the top page
“Configure” in “Configure policy filter”
“Execute” of the interface for which you want to
view the policy filter
(Click “Execute” of “Configure and view status
of IPv4 policy filter” if IPv4 addresses are used
for connection, or “Execute” of “Configure and
view status of IPv6 policy filter” if IPv6 addresses
are used.)
“Configure” in “List of group and user definition
service”
“Add” in “Configure service group”
