Network Connectivity
62
Xerox
®
WorkCentre
®
7800/7800i Series Color Multifunction Printer
System Administrator Guide
SLP
Printers use Service Location Protocol (SLP) to announce and look up services on a local network without
prior configuration. When SLP is enabled, the printer becomes a Service Agent (SA) and announces its
services to User Agents (UA) on the network using SLP.
Directory Agents (DA) are components that cache services. They are used in larger networks to reduce
the amount of traffic. DAs are optional. If a DA is present, then User Agents (UAs) and System Agents
(SAs) are required to use it instead of communicating directly with the printer.
Configuring SLP
1.
In Xerox
®
CentreWare
®
Internet Services, click
Properties
>
Connectivity
>
Setup
.
2.
Under Protocol, next to SLP, click
Edit
.
3.
For Protocol, select
Enabled
.
4.
For Directory Agent, type the IP address for the Directory Agent (DA) as needed.
5.
To group services, under Scope 1, 2, and 3, type a name as needed. Printers cannot recognize
services that are in different scopes.
6.
For Message Type, select an option.
−
Multicast
routes multicast packets between subnets.
−
Broadcast
does not route packets between subnets.
7.
Under Multicast Radius, type a value from 0 through 255.
Multicast Radius defines how many routers the multicast packet can cross.
8.
For Maximum Transmission Unit (MTU), type a value from 484 through 32768.
Note:
The maximum MTU for IP over Ethernet is 1500 bytes.
9.
Click
Save
.
