Network Connectivity
68
Xerox
®
WorkCentre
®
7800/7800i Series Color Multifunction Printer
System Administrator Guide
Configuring SNMPv3
SNMPv3 is the current standard version of SNMP defined by the Internet Engineering Task Force (IETF).
It provides three important security features:
•
Message integrity to ensure that a packet has not been tampered with in transit
•
Authentication to verify that the message is from a valid source
•
Encryption of packets to prevent unauthorized access
Editing SNMPv3 Properties
1.
In Xerox
®
CentreWare
®
Internet Services, click
Properties
>
Connectivity
>
Setup
.
2.
Under Protocol, next to SNMP, click
Edit
.
3.
Click
Edit SNMPv3 Properties
.
4.
To create the administrator account, under Administrator Account, select
Account Enabled
.
5.
Type and confirm the Authentication Password. The Authentication Password is used to generate a
key used for authentication.
6.
Type and confirm the Privacy Password. The Privacy Password is used for encryption of SNMPv3
data. The passphrase used to encrypt the data must match the passphrase on the Server.
Note:
Ensure that the passwords are at least eight characters in length. You can include any
characters except control characters.
7.
To save the new password, click
Select to save new password
.
8.
Under Print Drivers/Remote Clients Account, click
Account Enabled
. To reset the default password,
click
Reset
. This account allows Xerox
®
clients and drivers limited access to objects on the printer.
9.
Click
Save
to apply the new settings or
Undo
to retain the previous settings.
Configuring SNMP Advanced Settings
You can add, edit, or delete IP and IPX addresses for Network Management workstations that receive
traps from the printer.
Configuring SNMP Advanced Settings
1.
In Xerox
®
CentreWare
®
Internet Services, click
Properties
>
Connectivity
>
Setup
.
2.
Under Protocol, next to SNMP, click
Edit
.
3.
Click
Advanced Settings
.
4.
To add an IP trap destination address, under Trap Destination Addresses, click
Add IP Address
.
5.
To add an IPX trap destination address, under Trap Destination Addresses, click
Add IPX Address
.
6.
To edit an address, next to the address click
Edit
.
7.
To delete an address, select the check box next to the address and click
Delete
.
