Administrator Tools
Xerox
®
WorkCentre
®
7800/7800i Series Color Multifunction Printer 237
System Administrator Guide
Configuring Energy Saver Settings at the Control Panel
1.
At the printer control panel, press the
Machine Status
button, then touch the
Tools
tab.
2.
Touch
Device Settings
>
General
>
Energy Saver
.
Note:
If this feature does not appear, log in as a system administrator. For details, see
Logging In as
the System Administrator at the Control Panel
on page 21.
3.
On the Energy Saver screen, select an option:
−
Intelligent Ready
: The printer wakes and sleeps based on previous usage.
−
Job Activated
: The printer wakes when it detects activity. To change the default Low-Power
and Sleep timeout periods, touch
Energy Saver Timers.
•
To set the delay before the printer enters Low-Power mode, touch the Minutes field, then
to set the number, touch the arrows.
•
To set the delay before the printer enters Sleep mode, touch the Minutes field, then to set
a number, touch the arrows.
•
Touch
OK
.
−
Scheduled
: The printer wakes and sleeps according to a schedule that you specify. To specify
the schedule, touch
Scheduled Settings.
•
Touch a day of the week in the list.
•
To allow the printer to wake when it senses activity on that day, touch
Activity
.
•
To wake the printer at a specific time, touch
Time
. To set the time that the printer wakes
up on the specified day, touch
Warm Up Time
, then to select the time, touch the arrows.
Touch
OK
. To specify the time that the printer sleeps on the specified day, touch
Energy
Saver Time
, then to select the time, touch the arrows. Touch
OK
.
•
Touch
OK
.
4.
Touch
OK
.
